ARLA/CLUSTER: Escutar a ISS através de um Raspberry Pi 3 e de um SDR SoDeRa

[João Costa > CT1FBF]

Listening for the ISS with Raspberry Pi 3 and SoDeRa

Andrew Back G7JKB writes in Design Spark about using the Raspberry Pi
3 and the SoDeRa SDR to receive amateur radio transmissions from the
International Space Station

The SoDeRa board was only formally announced in February 2016 at the
Mobile World Congress. Developed by Lime Microsystems and featuring
their latest Field programmable RF (FPRF) transceiver, the LMS7002M,
the SoDeRa is capable of supporting just about any wireless standard
that operates between 100kHz and 3.8GHz. As if this wasn't enough,
it's also dual channel — MIMO — with two each fully independent
transmit and receive channels.

The board also includes an Altera Cyclone IV FPGA, enabling high
throughput processing to be carried out in hardware, between the
transceiver and FX3 USB 3.0 controller.

Read Andrew's article at
http://www.rs-online.com/designspark/electronics/eng/blog/listening-for-the-iss-with-raspberry-pi-3-and-sodera

SoDeRa Software Defined Radio
http://www.cnx-software.com/2016/02/23/canonical-introduces-sodera-software-defined-radio-solution-for-base-stations-and-iot-gateways/

Andrew Back G7JKB
https://twitter.com/9600
http://carrierdetect.com/