ARLA/CLUSTER: Alinco DX-R8T/E All-mode Desktop Receiver 150KHz~35(30)MHz SSB/CW/AM/FM/IQDX-R8T/E

[Carlos Fonseca - CT1GFQ]

150KHz~35(30)MHz SSB/CW/AM/FM/IQDX-R8T/E

All-mode Desktop Receiver



Photo shown with optional accessories



Features of DX-R8T/E 
  a.. I/Q signal output allows use of third-party SDR software 
  b.. 150 kHz�`35MHz (T-model up to 30MHz) in AM/USB/LSB/CW/FM and IQ modes 
  c.. Front and rear jacks make connecting accessories easy 
  d.. Direct frequency input to the dual VFO system 
  e.. Detachable front-control panel offers more mounting options 
  f.. Large LCD display makes operation simple 
  g.. Front-speaker and powerful 2W audio output makes it easy to hear signals 
  h.. Rugged, die-cast chassis 
  i.. Narrow ceramic filters (AM 2.4kHz/SSB 1kHz) and 0.5kHz audio-filtering for CW 
  j.. 4-level RF preamp/attenuator 
  k.. IF shift and RIT reduces interference 
  l.. Noise blanker enables clearer reception 
  m.. 3 banks/600 memory channels make it easy to save banks of favorite frequencies 
  n.. Two sets of programmed search pairs and varieties of scanning modes 
  o.. Auto-power-off, Sleep-timer, Dial and Key locks, RX indicator illumination and more! 
  p.. Computer utility software makes it easy to manage settings and edit memories 
  q.. Monitor shortwave signals from aviation, navigation and data sources

[Standard accessories]

  a.. DC cable (EDC-37)
[Optional accessories]

  a.. EDS-17 Front control remote kit (5m cable, front panel bracket, unit cover and hardware)

Freeware Downloads
Please click here for details

Specifications
      Genaral DX-R8 ALL MODELS 
      Operating mode USB, LSB, AM, CW, FM and I/Q output for SDR software 
      Antenna impedance 50ohm unbalanced 
      Frequency stability +/-1ppm 
      Power requirement 13.8V DC +/-15% (11.7 to 15.8V DC) 
      Ground method Negative ground 
      Current drain Receiver: 1.0A(max.) 
      Operating temperature -10digC to 60digC (+14digF to +140digF) 
      Dimentions 240(w) x 94(h) x 255(d)mm (Projections not included)
      (9.45"(w) x 3.7"(h) x 10"(d)

      240(w) x 100(h) x 293(d)mm (with projection)
      (9.45"(w) x 3.94"(h) x 11.54"(d) 
      Weight Approx. 4.1kg (144.6oz) 
      Receiver 
      Receive circuitry Double conversion superheterodyne 
      Sensitivity SSB: (0.15 to 1.8MHz)   0dBu(1uV)
      CW: (1.8 to 30MHz)   -12dBu(0.25uV)
      AM: (0.15 to 1.8MHz)   +20dBu(10uV)
      AM: (1.8 to 30MHz)   +6dBu(2uV)
      FM: (28 to 30MHz)   -6dBu(0.5uV) 
      Intermediate frequency 1st 71.75MHz, 2nd 455KHz 
      Selectivity SSB, CW, AM(narrow): 2.4KHz/-6dB  4.5KHz/-60dB
      AM, FM: 6KHz/-6dB  18KHz/-60dB
      -6dB: 6KHz or more
      -60dB: 16KHz or less (NFM) 
      Spurious and image rejection ratio More than 70dB 
      Audio output power More than 2.0W(8ohm 10%THD) 
      RIT variable range +/-1.2KHz 
      DX-R8 Coverage
      * 40KHz~150KHz appears on the screen but Below 150KHz is out-of-warranty and not intended for practical use. 
      Receiver Frequency coverage DX-R8T (USA/Canadian): 150KHz - 29.99999MHz

      DX-R8E (Worldwide): 150KHz - 34.99999MHz 


Note: Specifications are subject to change without notice or obligation.

-------------- próxima parte ----------
Um anexo em HTML foi limpo...
URL: http://radio-amador.net/pipermail/cluster/attachments/20110304/0bd62677/attachment.htm