<div dir="ltr"><div><div>Boas,<br><br></div>Mais uma vez, do criador Bob Bruninga, vem a recomendação (que em parte difere da da IARU, possivelmente por má interpretação???)<br></div><div>O tipo de SSID, não serve para ter um ícone bonito, no ecrã do PC, basicamente é para facilitar ao utilizador a mais rápida identificação do tipo de estação que se apresentou. No caso concreto dos equipamentos móveis/portáteis com a funcionalidade TNC e APRS integradas.<br></div><div><pre><span style="color:rgb(0,0,255)"><i>APRS SSID Recommendations 6 Feb 2012
---------------------------------------------------------------------
Updated 6 Feb 2012 to clarify the title of this document to be
SSID RECOMMENDATIONS not to imply any kind of
decoding "standard". That original NMEA
decodign standard is covered in the original spec
Updated 9 June 2010 for more flexibility using 1,2,3,4 and 15
Revised 2 June 2004 to add -10, -11, 12 and -15
SSID's have seen two different uses in APRS. Initially as an ICON
indicator back in the early 1990's. But that is obsolete for over
a decade. Now SSID's are used as an informal way of indicating one
of several different typical APRS applications.
Since many small displays for the handheld and mobile operator show
nearby APRS station callsigns that flash up on the screen, it is nice
to have some idea of what type of station or activity might be
involved simply from the callsign SSID without having to push
buttons, search lists, or look at maps to find out more about them.
SSID RECOMMENDATIONS: It is very convenient to other mobile
operators or others looking at callsigns flashing by, to be able to
recognize some common applications at a glance. Here are the
recommendations for the 16 possible SSID's (the limit of 16 comes
from the 4 bits available in the AX.25 protocol. Note, The SSID of
zero is dropped by most display applications. So a callsign with no
SSID has an SSID of 0.
-0 Your primary station usually fixed and message capable
-1 generic additional station, digi, mobile, wx, etc
-2 generic additional station, digi, mobile, wx, etc
-3 generic additional station, digi, mobile, wx, etc
-4 generic additional station, digi, mobile, wx, etc
-5 Other networks (Dstar, Iphones, Androids, Blackberry's etc)
-6 Special activity, Satellite ops, camping or 6 meters, etc
-7 walkie talkies, HT's or other human portable
-8 boats, sailboats, RV's or second main mobile
-9 Primary Mobile (usually message capable)
-10 internet, Igates, echolink, winlink, AVRS, APRN, etc
-11 balloons, aircraft, spacecraft, etc
-12 APRStt, DTMF, RFID, devices, one-way trackers*, etc
-13 Weather stations
-14 Truckers or generally full time drivers
-15 generic additional station, digi, mobile, wx, etc
* One-way trackers should best use the -12 one-way SSID indicator
because the -9's usually mean a ham in full APRS communication
both message and voice. The -9's can be contacted by APRS message
or by Voice on his frequency included in his beacon, or on Voice
Alert if he is in simplex range. The -12's are just moving Icons
on the map and since they have no 2 way communication for ham radio
they are not generally of routine interest to other operators.
OBJECTS or INTERNET: In addition, Objects or internet generated
stations can have any SSID, not just the original 16, since
Objects are not constrained by the AX.25 header and can have a
9 byte name. Here are some common OBJECT/Internet SSID's:
-63 for PSK63 HF stations
-tt for APRS TouchTone users (DTMF)
-ID for RFID
-A through -Z for Dstar
SSID BACKGROUND: Originally, in 1992, we had to use the SSID as
a way of indicating the type of station that transmitted a raw
NMEA-0183 GPS sting. But in the mid 1990's we began indicating
any of the nearly 200 APRS symbols by the setting of the AX.25
TOCALL of "GPSxyz". The "xyz" characters define the symbol from
the standard APRS symbol table <a href="http://www.aprs.org/symbols.html">www.aprs.org/symbols.html</a>.
The GPSxyz concept worked so well, the original SSID associations
are no longer a required part of the spec. But the conventions
that evolved from those early SSID's are still encouraged as
noted above, for easy recognition of station type or activity by
when only the callsign is seen.
The -1, -2, -3, -4 and -15 are kept generic so that anyone with
as many as 6 digipeaters, or 6 trackers or 6 weather stations or
6 vehicles can still have unique SSID's for each of his stations.
Beyond 6, people will just have to use any SSID that suits their
fancy. In some areas there might be 15 digipeaters all under
one guy's call!
SSID USAGE: The SSID's also might give a hint as to how someone
is getting into APRS whether via satellite, a one-way tracker, a
mobile, an HT or even via DTMF or an RFID device or whether he is
doing something special.
For example, if you are doing something special, change your
SSID to -6 to alert others to your excitement, or to make the
track-history begin and end on site, and not be tied to all
your other -9 travels. Or use -6 SSID for a packet sent
via the ISS or APRS satellite or for a 6 meter test so the
successful packet is preserved and not overwritten by the same
radio the next time you use it not via the ISS on the 144.39
national channel. By using separate SSID's the WEB data bases
will keep statistics and data separate from when you are working
normally on other bands with other SSID's.
So stick to the suggestions above for the obvious applications
where you can. Of course these are not rigid. If you have
more than 6 digipeaters, use any SSID you want. These are only
guidelines to hint at a station's possible application when all
you can see easily is the callsign on a screen or in a list....
de WB4APR, Bob</i></span></pre>Em face disto, o software estará correcto.<br></div><div>Mais, se formos dar uma volta pelo <a href="http://aprs.fi">aprs.fi</a>, pelo findu ou openaprs, verificaremos por comparação que a disciplina é coisa que não abunda cá pelo rectangulo Luso.<br></div><div>Podemos e devemos fazer melhor e tornar esta rede mais útil.<br><br></div><div>Respondendo ao tópico lançado pelo João CT1FBF, recordo-me de ter havido esse estudo e análise que não obteve resposta.<br></div><div>Mais, sei de casos em que foram (e estão em funcionamento) estações APRS relegadas para 144.900MHz<br></div><div><br><br>Salomão <br></div>CT2IRJ<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Aug 8, 2016 at 5:51 PM, CS7AGH <span dir="ltr"><<a href="mailto:cs7agh@sapo.pt" target="_blank">cs7agh@sapo.pt</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
Folgo saber que consegui levantar tantas opiniões/contributos.<br>
Citando o documento enviado pelo colega Salomão, fugindo um pouco ao
primeiro post em que referia a questão de os clientes indicarem ou
não a frequência QRV, parece-me que não é de todo seguido até porque
as descrições não batem "certo" com o APRSDroid, única experiência
que tenho:<br>
<br>
<div style="font-size:18.3px;font-family:sans-serif">SSID -0 (no SSID) should be used for all fixed
stations (home-qth) </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -1 should be used for all sorts of gateways
(IGATE, Sat-Gate, HF-Gate and so on) </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -2 should be used for APRS-TRACE-Digipeater
(which are all digipeaters with aliases of </div>
<div style="font-size:18.3px;font-family:sans-serif"> (RELAY,TRACE and TRACEn-N) </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -3 should be used for
APRS-RELAY-digipeaters (aliases of RELAY only) </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -4 2nd fixed stations (2nd Home-qth) </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -5 should be used for WX stations </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -6 unassigned </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -7 should be used for special mobile
stations (truck, bicycle, motorbike, Jeep, bus, RCV </div>
<div style="font-size:18.3px;font-family:sans-serif">ect., </div>
<div style="font-size:18.3px;font-family:sans-serif"> NOT for normal cars) </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -8 should be used for fixed, portable
stations </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -9 should be used for normal cars </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -10 should be used for Sat-stations (using
APRS via satellite) </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -11 should be used for TCPIP stations only
</div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -12 unassigned </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -13 unassigned </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -14 truck 18 Wheels </div>
<div style="font-size:18.3px;font-family:sans-serif">SSID -15 SW </div>
<br>
O SSID-5 nos clientes indica "Outra Rede (DSTAR, 3G)". Então, é para
WX ou estações 3G? <br>
<br>
<img src="cid:part1.B8BB98CF.D8FFB551@sapo.pt" alt="" width="467" height="909"><span class=""><br>
<br>
<br>
<p><br>
</p>
<pre cols="72">--
73,
Paulo
CS7AGH
A.R.L.A. #100 / DMC #08386 / EPC #25379 / Field Radio Operator #IFR212 / Portuguese QRP Radio Club #079 / QRP Respect #295 / SKCC #12615</pre>
</span></div>
<br>______________________________<wbr>_________________<br>
CLUSTER mailing list<br>
<a href="mailto:CLUSTER@radio-amador.net">CLUSTER@radio-amador.net</a><br>
<a href="http://radio-amador.net/cgi-bin/mailman/listinfo/cluster" rel="noreferrer" target="_blank">http://radio-amador.net/cgi-<wbr>bin/mailman/listinfo/cluster</a><br>
<br></blockquote></div><br></div>