<div class="gmail_quote"><div style="margin: 20px;">
<p></p>
<p>In this Edition, you will find a list of all the new & updated articles
now on our site.</p>
<h5><u>New articles.</u></h5>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 03-05-2010 <b>Adi</b> AT-401</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Expanded RX and TX range for the ADI
AT-401</td></tr>
<tr>
<td colspan="2">
<hr>
NOTE! The first step is the microprocessor master reset and will erase ALL
memories. Press F and CALL while turning radio on. Display will
show...<br><a href="http://www.mods.dk/view.php?ArticleId=4591" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 22-05-2010 <b>Alinco</b> DR-510</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Modification after Audio Amplifier stage
went dead</td></tr>
<tr>
<td colspan="2">
<hr>
After several of trustful service the audio amp of my DR-510 went suddenly
dead; no audio, and the amplifier stage became very host after just a
short...<br><a href="http://www.mods.dk/view.php?ArticleId=4598" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 02-06-2010 <b>Heathkit</b> SA-2010</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Heathkit SA-2040 Antenna Tuner - 160m
Modification</td></tr>
<tr>
<td colspan="2">
<hr>
In the November 2005 issue of CQ DL (a German ham radio magazine) there
was an article listed for a 160m modification to a Heathkit SA-2040
Antenna Tu...<br><a href="http://www.mods.dk/view.php?ArticleId=4605" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 31-05-2010 <b>Icom</b> IC-T70</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> TX/RX mod for the Icom IC-T70A</td></tr>
<tr>
<td colspan="2">
<hr>
Remove the battery. Remove the two screws that are on the heat sink/case
at the base of the radio that were underneath the removed battery.
....<br><a href="http://www.mods.dk/view.php?ArticleId=4604" target="_blank">Click here to
view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 02-06-2010 <b>Icom</b> IC-E90</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Replacing Original Li-on Batteries in BP-217
Pack</td></tr>
<tr>
<td colspan="2">
<hr>
You need to purchase 2x 3.6v Li-ion Type 18500 Batteries with Tags to do
this project. The batteries in the battery pack for my IC-E90 died. The
pric...<br><a href="http://www.mods.dk/view.php?ArticleId=4606" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 20-05-2010 <b>Icom</b> IC-4KL</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> ICOM IC-4KL HF Linear Amplifier power
supply</td></tr>
<tr>
<td colspan="2">
<hr>
As I decided to repair my IC-4KL, bought from a friend who have rejected
him as irreparable. The main fault was the Power Supply, after a year
saved ...<br><a href="http://www.mods.dk/view.php?ArticleId=4597" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 27-05-2010 <b>Icom</b> ID-880</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> TX/RX Frequency expansion for Icom
ID-880H</td></tr>
<tr>
<td colspan="2">
<hr>
Remove bottom cover of Icom ID-880H (seriel number sticker side) When
cover is removed SO-239 antenna will now be on left side, locate F11 &
F12 (F11 ...<br><a href="http://www.mods.dk/view.php?ArticleId=4600" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 05-04-2010 <b>Kenwood</b> TM-721</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> How to connect a S-meter to the Kenwood
TM-721A or TM-731A</td></tr>
<tr>
<td colspan="2">
<hr>
I connected to my radio a big S-meter JUMBO style and its good for give a
good signal report or to have the best signal from a station with a beam.
....<br><a href="http://www.mods.dk/view.php?ArticleId=4571" target="_blank">Click here to
view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 21-04-2010 <b>Kenwood</b> TH-F6</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> External speaker/microphone PTT not function
for TH-F6A</td></tr>
<tr>
<td colspan="2">
<hr>
My external MFJ-285K speaker-microphone would not key the ptt on my
TH-F6A. The solution was eventually kind of obvious, but if this happens
to you, ...<br><a href="http://www.mods.dk/view.php?ArticleId=4587" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 23-04-2010 <b>Kenwood</b> TM-D710</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Connect a Deluo GPS to TM-D710A</td></tr>
<tr>
<td colspan="2">
<hr>
May be you want to use a Deluo Gps with the TMD710A. Follow this steps:
Remove the 2 screws on the back of the Operation Panel. Locate and
re...<br><a href="http://www.mods.dk/view.php?ArticleId=4588" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 18-05-2010 <b>Kenwood</b> R-1000</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Easy bypass of MW attenuation for
R-1000</td></tr>
<tr>
<td colspan="2">
<hr>
I was surprised how easy it was to totally bypass the R-1000's MW
attenuation. I had never done a radio modification prior to this. Here's
wha...<br><a href="http://www.mods.dk/view.php?ArticleId=4596" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 27-05-2010 <b>Midland/Alan</b> 248-EXCEL</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Midland 248 Excel band and power
modification</td></tr>
<tr>
<td colspan="2">
<hr>
Remove the Bottom cover there is a white wire held together with solder,
remove the solder so the wire is free this enables 10watts power. On the
f...<br><a href="http://www.mods.dk/view.php?ArticleId=4601" target="_blank">Click here to
view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 15-04-2010 <b>Motorola</b> OTHER</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Motorola SM-150 Replacing the obsolete audio
amp chip with a common</td></tr>
<tr>
<td colspan="2">
<hr>
The SM150 uses a TDA1519A dualstage amp. After investigating and not
finding one available. i decided to change the amp to an IC chip amp
commonly ava...<br><a href="http://www.mods.dk/view.php?ArticleId=4585" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 25-04-2010 <b>Motorola</b> SPECTRA</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Using a Spectr as an APRS radio</td></tr>
<tr>
<td colspan="2">
<hr>
Using a Motorola VHF Spectra as an APRS radio on 144.390 MHz. This mod was
done in order for me to use a readily available Motorola mobile A5 model
V...<br><a href="http://www.mods.dk/view.php?ArticleId=4590" target="_blank">Click here to
view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 10-05-2010 <b>Motorola</b> OTHER</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> jump password cps.05.09</td></tr>
<tr>
<td colspan="2">
<hr>
open cps.exe with hexeditor, find and modify as follow: addr 001232AC 75
09 ----> 90 90 addr 00202878 75 05 ----> 90 90 addr 0023DD74 75 05
---...<br><a href="http://www.mods.dk/view.php?ArticleId=4594" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 16-05-2010 <b>Motorola</b> MAXTRAC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> How to Use a 146-174 Maxtrac on 144.390 APRS
without burning it up!</td></tr>
<tr>
<td colspan="2">
<hr>
One of the Problems with the Motorola Maxtrac is if its programmed out of
its Frequency Range it will go to full output power. Thi is typically
about ...<br><a href="http://www.mods.dk/view.php?ArticleId=4595" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 11-04-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Sommerkamp TS-275 expand frequency
modification.</td></tr>
<tr>
<td colspan="2">
<hr>
The modifications of SommerKamp TS-275 DX, also for Alan ct 180 You can
modify the frequency ranges for your TS-275DX 2m handy by pressing
"Function"...<br><a href="http://www.mods.dk/view.php?ArticleId=4574" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 11-04-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Intek MT-3030 more power modification.</td></tr>
<tr>
<td colspan="2">
<hr>
To allow yourself more than 500mw PMR446 and LPD, take off the battery
cover and on the top left there is a small sticker, remove this to find a
screw...<br><a href="http://www.mods.dk/view.php?ArticleId=4576" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 12-04-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Conversion of the Condor 46 for use with
9600 bps (D-STAR)</td></tr>
<tr>
<td colspan="2">
<hr>
This article is in Dutch and if you like you can translate the article to
English by google translator, or you can download this PDF file where the
ar...<br><a href="http://www.mods.dk/view.php?ArticleId=4577" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 14-04-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Wouxun KG-UVD1P USB Cable Issue</td></tr>
<tr>
<td colspan="2">
<hr>
Like many other UVD1 users I also experience communication problems with
the radio using the USB cable purchased in China (e.g. this one
<a href="http://www.r." target="_blank">http://www.r.</a>..<br><a href="http://www.mods.dk/view.php?ArticleId=4583" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 19-04-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Disable and enable tx for JRC JSB-167</td></tr>
<tr>
<td colspan="2">
<hr>
to disable tx: press func - 6 - 7 keys to enable tx: press func -6 - 8
keys <br><a href="http://www.mods.dk/view.php?ArticleId=4586" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 25-04-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Realistic TRC-503 - 5 to 10 channels</td></tr>
<tr>
<td colspan="2">
<hr>
This is a modification to expand the transmit/receive capabilities of the
TRC-503. It will give you 10 full channels of operation instead of the 5
tha...<br><a href="http://www.mods.dk/view.php?ArticleId=4589" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 05-05-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> How to disable the beep sound</td></tr>
<tr>
<td colspan="2">
<hr>
This is how to disable the the beep for Quansheng TG-5A. <br><a href="http://www.mods.dk/view.php?ArticleId=4592" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 26-05-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Recal 1792 noise rx at frequency les than 2
MHz</td></tr>
<tr>
<td colspan="2">
<hr>
When the antenna is connected (50 ohm load o RF generator) receiver Racal
1972 has a noise problem at frequency less then 2 Mhz. The noise is
produc...<br><a href="http://www.mods.dk/view.php?ArticleId=4599" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 28-05-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Intek M-5050 Open channels and power up to 4
watts.</td></tr>
<tr>
<td colspan="2">
<hr>
Bellow the batterys there is a plastis peace remove it andyou will see 3
jumpers cut all 3 and you will increase your PMR radio to 99 LPD, 16 PMR
incl...<br><a href="http://www.mods.dk/view.php?ArticleId=4602" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 13-04-2010 <b>Uniden</b> BC-3500XLT</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Basic Frequency Counter</td></tr>
<tr>
<td colspan="2">
<hr>
Using some manual dexterity hold down 'hold', '0' and '3' while switching
on the radio enables the undocumented frequency coun...<br><a href="http://www.mods.dk/view.php?ArticleId=4578" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 15-04-2010 <b>Uniden</b> BC-92XLT</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Band Plan Select</td></tr>
<tr>
<td colspan="2">
<hr>
There seems to be some difference between early and later models of the
UBC-92XLT. Mine does not have the service search feature. In some models
you ...<br><a href="http://www.mods.dk/view.php?ArticleId=4584" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 30-05-2010 <b>Yaesu</b> VX-150</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Using 2700 mah Sanyo on vertex vx-150
battery pack.</td></tr>
<tr>
<td colspan="2">
<hr>
Remove original worn out battery cell from the pack, be sure not to brake
some sidings and edges. Solder fresh sanyo 2700mah nicad battery and fit
in...<br><a href="http://www.mods.dk/view.php?ArticleId=4603" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 07-04-2010 <b>Yaesu</b> MH-48</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> YAESU MH-48 DTMF audio mod</td></tr>
<tr>
<td colspan="2">
<hr>
This is a simple mod for the YAESU MH-48DTMF handmike to provide a much
louder and more dynamics audio. <br><a href="http://www.mods.dk/view.php?ArticleId=4572" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 08-04-2010 <b>Yaesu</b> FRG-7700</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> FRG-7700 Increasing front end overload
performance #2</td></tr>
<tr>
<td colspan="2">
<hr>
The FRG7700 front end performance is improved dramatically by increasing
the standing current of the first and second mixers. This mod, in
conjunction...<br><a href="http://www.mods.dk/view.php?ArticleId=4573" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 11-04-2010 <b>Yaesu</b> FRG-7700</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> All mode squelch for FRG7700</td></tr>
<tr>
<td colspan="2">
<hr>
The FRG7700 has a very good squelch, unfortunately this is normally active
only in FM mode. This mod will allow the squelch to be used with the AM
an...<br><a href="http://www.mods.dk/view.php?ArticleId=4575" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 13-04-2010 <b>Yaesu</b> FT-747</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Fast backup battery discharge for
FT-747/FT-80C</td></tr>
<tr>
<td colspan="2">
<hr>
Some times this rig has a fast discharge of the memory battery. It would
be caused by D8 D9 or the microprocessor, in many cases it is just D8 or
D9....<br><a href="http://www.mods.dk/view.php?ArticleId=4579" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 13-04-2010 <b>Yaesu</b> FT-747</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> FT-747GX intermitent self TX</td></tr>
<tr>
<td colspan="2">
<hr>
This rig sometimes starts TX for it self. Cut D87 on the main board and
solve this issue. <br><a href="http://www.mods.dk/view.php?ArticleId=4580" target="_blank">Click here to view the
article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 14-04-2010 <b>Yaesu</b> FRG-7700</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> A simple way to access 256 memories.</td></tr>
<tr>
<td colspan="2">
<hr>
A clever previous mod describes how to access 256 memory channels instead
of the 12 originally provided. It uses an outboard double BCD switch
assembl...<br><a href="http://www.mods.dk/view.php?ArticleId=4581" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 14-04-2010 <b>Yaesu</b> FT-60</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Replacement of elements from FT60 battery
pack (accu).</td></tr>
<tr>
<td colspan="2">
<hr>
Split the case using a knife or a screwdriver. The two parts are glued,
but easy to separate. Solder the 6 elements with thin copper foils
brid...<br><a href="http://www.mods.dk/view.php?ArticleId=4582" target="_blank">Click here
to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Created:</b> 07-05-2010 <b>Yaesu</b> FT-1802</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> FT-1802 and FT-1900 power alignment</td></tr>
<tr>
<td colspan="2">
<hr>
press and hold REV & DM/R and switch on the radio rotate the DIAL knob
to set the alignment paraneter to 145.000 HP connect a dummy load
....<br><a href="http://www.mods.dk/view.php?ArticleId=4593" target="_blank">Click here to
view the article</a>.</td></tr></tbody></table>
<p>
</p><hr>
<h5><u>Revised articles since our last newsletter.</u></h5>
<p><b>Note,</b> sometimes it can be difficult to see the changes since the
update can be a little correct in the text, but sometime the update can be a new
picture to the existing article.</p>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Updated:</b> 29-05-2010 <b>Icom</b> IC-7000</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Icom HM-151 modifications (original IC-7000
hand mic)</td></tr>
<tr>
<td colspan="2">
<hr>
Note, the article has been update 29-05-2010. I have experimented with the
original hand microphone that comes with the IC-7000. One thing I
noticed...<br><a href="http://www.mods.dk/view.php?ArticleId=3786" target="_blank">Click
here to view the article</a>.</td></tr></tbody></table>
<p>
</p><table width="95%" border="0">
<tbody>
<tr>
<td><b>Updated:</b> 04-04-2010 <b>Other</b> MISC</td></tr>
<tr>
<td colspan="2"><b>Subject:</b> Intek MT 5050 power mod</td></tr>
<tr>
<td colspan="2">
<hr>
Remove the battery cover and the small sticker at the bottom of the radio
inside the cover. Link C: Cut the link for 4w HI Power and 500mw LO Power
(...<br><a href="http://www.mods.dk/view.php?ArticleId=4185" target="_blank">Click here to
view the article</a>.</td></tr></tbody></table>
<p><b></b></p>
<p><br></p>
<p>Best regards<br><a href="http://mods.dk" target="_blank">mods.dk</a></p>
</div></div><br>