ARLA/CLUSTER: Guia para trabalhar 3YØI no modo digital FT-8 WSJT-X Fox / Hound

[João Costa > CT1FBF]

FT-8 Guidance for working 3YØI WSJT-X Fox / Hound

We are asking everyone to follow these guidelines for calling 3YØI on FT-8.
You will get through faster by using these simple guidelines:

   - To avoid confusion please use WSJT-X Version 1.9.1
   - We will use DX-pedition mode for all bands except 160m
   - Configure the software & radio per the WSJT-X and your radio’s
   installation instructions.
   - Do not use 3YØI as your first FT8 on the air experience
   - Your operating frequency control should be under CAT (rig) control
   from the program – NOT manually from your VFO. You must add to WSJT-X.
   - Your WSJT-X software must be configured as a Hound.
   - Call us ONLY if you are able to decode 3YØI responding to other Hounds
   or if you decode a CQ from 3YØI. You may initiate a calling sequence by
   double clicking 1 on any 3YØI response.
   - 3YØI will be transmitting BELOW 1,000 Hertz. You MUST select an open
   calling frequency between 1,000 – 4000 Hertz.
   - Once 3YØI replies to a Hound with RR73 the QSO is completed and logged.
   - The Hound does not need to send 73 to complete the QSO.

Note 1: This assumes you have WSJT-X configured for Double Click on call
sets Tx enable

Note 2: If you don’t complete a QSO within five minutes after being called
by 3YØI that you should restart a new QSO.

See you in the pileups!

The southern hemisphere’s summer is coming soon, so do Rebel plans start to
accelerate. Announcing the 3YØI band plan – frequencies and modes we’ll use
while operating from Bouvet Island.
BAND / MODECWSSBFT8
160M 1822 – 1840
80M 3502 3785 3567
40M 7002 7090 7056
30M 10106 – 10131
20M 14002 14190 14090
17M 18072 18140 18095
15M 21002 21200 21091
12M 24892 24940 24911
10M 28002 28440 28091
6M 50105 50140 –
-------------- próxima parte ----------
Um anexo em HTML foi limpo...
URL: http://radio-amador.net/pipermail/cluster/attachments/20181022/e0bc5713/attachment.htm