ARLA/CLUSTER: New Firmware Update for the IC-7600 HF Amateur radio Transceiver

[João Costa > CT1FBF]

New Firmware Update for the IC-7600 HF Amateur radio Transceiver

Icom have announced a significant firmware update for the *IC-7600* *HF
Transceiver* at the Dayton Hamvention 2015. The update provides a new range
of functions including waterfall screen for the band scope, amongst many!

Details of each update and download instructions are as follows.
Please note that before you install the firmware, you should download the
installation guide using the link on the firmware update page:

IC-7600 All versions: Firmware Update Version 2.00 – Download here!
<http://www.icom.co.jp/world/support/download/firm/IC-7600/2_00/index.html>

* Improvements*

• Waterfall screens, mouse operation, and other additional functions have
been added to the spectrum scope.
• An APF AF Level setting has been added.
• CI-V commands for antenna control, logging software and RIT/DELTA-TX have
been added.
• TX Delay (HF/50M) settings have been added to adjust the TX delay time.
• A Standby setting has been added to remotely turn ON the IC-7600
transceiver by a command from the REMOTE jack.
• “MOS-FET� is now the default value of “SEND Relay Type.�

* Further Information*

For more information, please refer to IC-7600 Information for Firmware
version 2.00
<http://www.icom.co.jp/world/support/download/manual/pdf/IC-7600_ENG_FirmUpInfo_V200_0.pdf>.

• Firmware can be updated using a USB flash drive. Thoroughly read Section
14 (UPDATING THE FIRMWARE) of the instruction manual to know what the
update requires.
• Backup your transceiver’s data onto a USB flash drive as it is possible
that your data could get lost or corrupted during the update. Thoroughly
read Section 10 (File saving) of the instruction manual for details.
• Never turn OFF the transceiver power during the update.
-------------- próxima parte ----------
Um anexo em HTML foi limpo...
URL: http://radio-amador.net/pipermail/cluster/attachments/20150519/c03b1d1a/attachment.html