ARLA/CLUSTER: CQ World Wide VHF Contest, de 19 a 20 Julho das 18:00 às 21:00 UTC
João Costa > CT1FBF
Quinta-Feira, 3 de Julho de 2014 - 13:42:19 WEST
CQ World Wide VHF Contest
Begins: 1800 UTC Saturday, July 19, 2014
Ends: 2100 UTC Sunday, July 20, 2014
North American Stations Not Operating From The Home QTH
If you are not ROVER nor HILLTOPPER please use the ARRL-SECTION line
in the Cabrillo format to put the state (preferably) or US call area
you operated from (since using QRA locators to determine this can be
ambiguous in some cases). If the address in the Cabrillo ADDRESS lines
reflects the operating QTH, you can ignore this request.
You can view the list of received logs here. If you have submitted a
log that the robot recognizes you will receive a receipt from it. You
will only be able to see your call in the list of received logs if you
have received a receipt. If you can't see your callsign in the list
and haven't received a receipt, then try submitting to the robot again
(after checking for errors). Note that in the days immediately
following the contest, processing may take a while with the large
number of simultaneous submissions.
Log Submission Checklist
Make sure that your log conforms to the standard Cabrillo format, in
particular the following requirements to avoid having the robot bounce
The first line begins with START-OF-LOG:
There is a CALLSIGN: line.
There is a NAME: line with only one name even for multi operator entries.
There are ADDRESS: lines with a correct postal address (so we can send
you a certificate if you win one). There should only be one address
even for multi operator entries.
There are QSO: lines (yes, really).
BAND should be ALL, 144 or 50 only. 6M and 2M will converted to ALL
by the robot
Do not put in RST's - the VHF report is only your grid square
The last line contains only END-OF-LOG:
Most recent version logging programs conform to the Cabrillo format,
but check your version!
Mais informações em: http://www.cqww-vhf.com/
Mais informações acerca da lista CLUSTER