ARLA/CLUSTER: NASA convida radioamadores a transmitir mensagens para a nave Juno em 28 MHz

Paulo Faria pauloafaria sapo.pt
Quinta-Feira, 5 de Setembro de 2013 - 22:29:27 WEST


Sim sim, ainda a semana passada usei o AO7, velha e boa máquina. Entretanto 
aqui é algo diferente, o mecanismo de recepção não é sintonizado numa 
determinada frequência, trata-se de usar um detector com 47MHz de largura, 
projetado para outros fins.
Também a distância é outra. Dizem eles 50K quilómetros. Agora com 
franqueza, quem é que hoje em dia ainda tem arrays de antenas e uns KWs em 
10 metros?
Em tempos idos havia uns entusiastas de EME a tentar 10 metros, mas o path 
lost era tão grande...
A Nasa está a ver se arranja colaboração a nível global e de borla.
É claro que com tudo isto, não quero dizer que não se tente, muito pelo 
contrário, apenas salientava algumas dificuldades a esperar.
A derradeira dificuldade, será saberem quem lá colocou sinal, isso vai ser 
difícil.
Sou adepto de coisas difíceis, o espaço é a última fronteira.
Não se esqueçam que é só em Outubro, ainda dá tempo de inclinar as antenas, 
e porque não construir um sistema radiante adequado.
Boa sorte a todos. Vou estar à escuta da cacofonia de dits e dahts, se for 
como hoje com a propagação assim, não deve ser difícil ouvir.

Vy 73 CS8ABA


Sent with AquaMail for Android
http://www.aqua-mail.com


On 5 de Setembro de 2013 20:28:03 AV <radiophilo  gmail.com> wrote:
> Em tempos houve alguns satélites de amador com emissão nos 10m e eram bem
> fáceis de receber.
> Julgo que o problema maior deste caso terá a ver com as caracteristicas do
> receptor.
>
> 73,
> António Vilela
> CT1JHQ
>
>
> On 5 September 2013 17:34, Paulo Faria <pauloafaria  sapo.pt> wrote:
>
> >  Como se isso fosse mais fácil.
> > Fazer passar 28MHz pela ionosfera, é milhares de vezes mais difícil, do
> > que 144MHz. E se houver boa ionização, pior ainda, volta tudo para terra.
> > O sistema detector não é um vfo sensível, nem o sistema será capaz de
> > (ler) os indicativos.
> > Sugere a Nasa, key down durante 30 segundos entre 28.001 e 28.450. Só
> > espero que se lembrem dos beacons, e não estraguem o dx a ninguém.
> > Os americanos não têm limites para infracção de regras, mas nós temos.
> > Finalmente, provavelmente os piratas dos camionistas brasileiros,
> > espalhados por todo o espectro, devem cumprir a missão com sucesso,
> > transmitem em AM, durante mais de 30 segundos de cada vez, e estão
> > espalhados pela banda de 10 metros, entre outras.
> >
> > Cumprimentos
> > Paulo Faria CS8ABA
> >
> >
> > Sent with AquaMail for Android
> > http://www.aqua-mail.com
> >
> > On 5 de Setembro de 2013 15:00:12 Carlos Fonseca ** wrote:
> >
> > Aos que se choram de nao conseguirem chamar a iss, aproveitem esta
> > oportunidade pata depois nao dizerem que nao avisaram......
> >
> > 73's de CT1GFQ
> > REP#1406
> > SKCC#466C
> >
> > Cump.
> > Carlos Fonseca
> >
> > (Email enviado via plataforma movél).
> > No dia 5 de Set de 2013 13:04, "João Costa &gt; CT1FBF" <ct1fbf  gmail.com>
> > escreveu:
> >
> >> Radio hams to say 'HI' to Juno on 10m
> >>
> >> NASA's Juno mission is inviting amateur radio operators around the
> >> world to transmit a coordinated message on the 28 MHz band to the Juno
> >> spacecraft
> >>
> >> NASA's Juno spacecraft will fly past Earth on October 9, 2013 to
> >> receive a gravity assist from our planet, putting it on course for
> >> Jupiter.
> >>
> >> To celebrate this event, the Juno mission is inviting amateur radio
> >> operators around the world to say "HI" to Juno in a coordinated Morse
> >> Code message. Juno's radio and plasma wave experiment, called Waves,
> >> should be able to detect the message if enough people participate.
> >>
> >> Juno will have a better chance of detecting the signal from many
> >> operators if the signal is spread out across the spectrum. The Juno
> >> Waves instrument is a broadband receiver, and the detector being used
> >> for this event has a band width of 1 MHz. It is better for detection
> >> of the signal to have a broadband signal coming in.
> >>
> >> For this experiment, we would like to ask those participating to
> >> spread out in frequency across the 10 meter band. We have supplied a
> >> table of suggested frequencies between 28 and 29 MHz, based on the
> >> last letter of your call. When the HFR receiver is tuned to 28MHz, the
> >> center frequency is 28.5 MHz. A 50 kHz high pass filter limits low
> >> frequencies hitting the detector, so the frequency table excludes 28.5
> >> MHz ±50 kHz. The natural signals we expect to measure at Jupiter will
> >> consist of a large number of discrete tones, so spreading the signals
> >> out in this manner is a good approximation to the signals we expect to
> >> detect. But at Jupiter, we don't expect to be able to decode CW in our
> >> telemetry!
> >>
> >> The 28 MHz band was chosen for this experiment for several reasons.
> >> The Waves instrument is sensitive to radio signals in all amateur
> >> bands below 40 MHz, but experience with the University of Iowa
> >> instruments on the Galileo and Cassini earth flybys shows significant
> >> shielding by the ionosphere at lower frequencies. As sad as it sounds,
> >> we hope for lousy band conditions on October 9, so an appreciable
> >> fraction of the radiated energy escapes the ionosphere into space, and
> >> is not refracted back down to the ground somewhere else on the planet.
> >>
> >> Juno's antenna consists of a pair of tapered 2.8 meter long titanium
> >> tubes, deployed from the bottom deck of the spacecraft under the +X
> >> solar array and magnetometer boom. A high impedance radiation
> >> resistant preamp sits at the base of the antenna and buffers the
> >> signals from 50 Hz to 45 MHz. The elements are deployed with an
> >> opening angle of about 120 degrees. Ten meters is above the resonant
> >> frequency of the antenna and NEC analysis indicates a lobe generally
> >> along the spin axis of the spacecraft. This will be good for detection
> >> on the inbound part of closest approach to Earth.
> >>
> >> The Waves instrument uses four receivers to cover the frequency range
> >> of 50 Hz to 41 MHz. Signals up to 3 MHz are bandpass filtered, sampled
> >> by A/D converters and FFT processed into spectra using a custom FFT
> >> processor developed by The University of Iowa under a grant from the
> >> Iowa Space Grant Consortium.
> >>
> >> Please join in, and help spread the word to fellow amateur radio
> >> enthusiasts!
> >>
> >> NASA - Say "HI" to Juno!
> >> http://www.jpl.nasa.gov/hijuno/
> >> See How do I participate ? for the frequency list.
> >>
> >>
> >> _______________________________________________
> >> CLUSTER mailing list
> >> CLUSTER  radio-amador.net
> >> http://radio-amador.net/cgi-bin/mailman/listinfo/cluster
> >>
> >>
> > _______________________________________________
> > CLUSTER mailing list
> > CLUSTER  radio-amador.net
> > http://radio-amador.net/cgi-bin/mailman/listinfo/cluster
> >
> >
-------------- próxima parte ----------
Um anexo em HTML foi limpo...
URL: http://radio-amador.net/pipermail/cluster/attachments/20130905/08f0f78b/attachment.html


Mais informações acerca da lista CLUSTER