ARLA/CLUSTER: OZ7IGY 10m beacon (28, 220.2 MHz) na plataforma "Next Generation Beacons "

[João Costa > CT1FBF]

OZ7IGY 10m beacon now on Next Generation Beacons platform

On Thursday, April 18 the 28.220.2 MHz OZ7IGY beacon migrated to the
Next Generation Beacons platform

The 10 m beacon is now frequency and time locked to GPS. The sequence
is timed to start at 00 second sending PI4 followed by a short pause
then CW ID sending callsign and locator, then pause and carrier until
next cycle. The nominal frequency remains the same, i.e. 28,221 MHz.

To decode PI4 tune your receiver to 800 Hz below the nominal
frequency, just like you have done always when you want to decode a
beacon CW signal at 800 Hz. On most radios this is a USB dial of
28.220.2.

Download PI-RX to decode PI4
http://www.rudius.net/oz2m/software/pi-rx

Next Generation Beacons platform
http://www.rudius.net/oz2m/ngnb

OZ7IGY status page
http://www.rudius.net/oz7igy

73
Bo, OZ2M