ARLA/CLUSTER: Com uma pecinha apenas se faz uma antena simples.

[Carlos Fonseca]

Não é dificil de fazer.

73's.
Carlos, CT1GFQ

2011/11/19 João Costa > CT1FBF <ct1fbf  gmail.com>

> Simple and Inexpensive Dipole and V Antenna Mount
>
> If you do lots of experimenting with whip type antennas, here is an
> idea for a unique, simple and inexpensive method for mounting them!
>
> The Simpson Strong Tie “T� (aka hurricane connector) runs less than $5
> at Home Depot or Lowes and already comes with two 1/2″ holes
> predrilled. Just bend (or use as is for horizontal dipole) and install
> CB 3/8″ connectors and go!
>
> The V beam mount (shown in the second picture below), is bolted to a
> 1/2″ EMT mast for mobile use.
>
> http://tinyurl.com/87ra462
>
>
> Use as a horizontal dipole or bend 90 degrees for a horizontal V beam!
> Just bolt bottom of “T� to your mast. For heavier antennas, use two
> “T’s� back-to-back bolted or welded together.
>
>
> http://www.cqdx.ru/ham/wp-content/uploads/2011/11/KL7JRVerticalDipoleandVBeamMounts1.jpg
>
>
> On left of photo above shows bending for vertical or horizontal
> dipole. On right it is shown bent for V type antennas and mounted on
> short mast.
>
> Both already Arctic proven!
>
> by KL7JR
>
> Fonte: RW3AH - KL1A HAM Radio Blog
>
>
> _______________________________________________
> CLUSTER mailing list
> CLUSTER  radio-amador.net
> http://radio-amador.net/cgi-bin/mailman/listinfo/cluster
>
>
-------------- próxima parte ----------
Um anexo em HTML foi limpo...
URL: http://radio-amador.net/pipermail/cluster/attachments/20111119/2af1fb25/attachment.html