Re: ARLA/CLUSTER: TenTec Omni VII o primeiro transceptor ligado directamente á Internet.

Salomao Fresco sal.fresco gmail.com
Sexta-Feira, 23 de Novembro de 2007 - 08:51:48 WET


Olá!

Carlos:
Está cá o ICOM, sim senhor!Pela minha parte te asseguro de que não estás a
ter alucinações! lol

Um abraço

Salomão




On Nov 23, 2007 8:48 AM, Carlos Mourato <radiofarol  gmail.com> wrote:

> Por acaso vou fazer um FWD directamente do mail que recebi, pra ver se o
> misterioso ICOM continua lá ou se muda de marca! ehehehehe!
>
> 73 de CT4RK
>
> ---------- Forwarded message ----------
> From: João Gonçalves Costa <joao.a.costa  ctt.pt>
> Date: 22/11/2007 17:07
> Subject: ARLA/CLUSTER: TenTec Omni VII o primeiro transceptor ligado
> directamente á Internet.
> To: Resumo Noticioso Electrónico ARLA <cluster  radio-amador.net >
>
>
>
> *Caros Colegas,*
>
> *A TenTec lançou na HAMVENTION 2007 como estão recordados, o primeiro
> transceptor que se pode ligar directamente á Internet sem a necessidade de
> qualquer PC local e com controle remoto imediato. *
>
> *O TenTec Omni VI deve ser conectado através da sua porta Ethernet
> incorporada, a um Router  e a partir deste pode ser operado remotamente de
> qualquer PC ou Portátil ligado á Internet através de interface gráfico
> disponível pelo fabricante. *
>
> *Definitivamente, aquela técnica utilizada por muitos Dx`s de inventar uma
> desculpa para ir a correr a casa fazer aquela "figurinha" que faltava, está
> resolvida por $2.650 Dólares. *
>
>
>  *OMNI-VII is the first truly Net-Ready ham transceiver.* No PC required
> at the rig to operate remote! Locate your OMNI-VII anywhere you have
> wideband Internet access. Simply connect its built-in Ethernet port to
> your router with our exclusive One Plug connection. Delivers live receive
> AND transmit operation from anywhere else in the world from another wideband
> Internet access! A simple GUI (Graphical User Interface) written for the
> OMNI-VII will be available for download at no charge from our firmware
> update website. That's not all: the latest GUI source code (written in
> Visual Basic) and complete programming instructions can be downloaded to
> build your own GUI.
>
> ***Unrivaled** Close-in Dynamic Range** in price class *. OMNI-VII just
> raised the receiver performance bar for the competition! Our new
> Distributed Roofing Filter architecture places filters in both the 1 stand 2
> nd IFs at just the right places. Three built-in filters at 20 kHz, 6 kHz,
> and 2.5 kHz are included (2.5 kHz is a Collins mechanical filter).
> Optional Collins mechanical filters at 500 Hz and 300 Hz are also available.
> Filters can be selected manually or use AUTO for automatic selection via
> front panel DSP Bandwidth control. Also included are 37 built-in DSP
> bandwidth filters from a minimum of 200 Hz to 9 kHz maximum.
>
> Take a look at what else OMNI-VII brings to your shack:
>
> *HF + 6:* Transmit coverage on 6 through 160 meters, 100 watts output,
> even on 6. General coverage receive from 500 kHz to 30 MHz continuous plus
> 48 to 54 MHz. SSB, CW, AM, FM, Digital modes. Dual VFOs with SPLIT and
> REVERSE functions. **
>
> *Full-function Color Screen: *STN transmissive color LCD display with CFL backlight,
> 320 x 240 pixels.
>
> *Legendary QSK CW* includes adjustable rise and decay times. User
> adjustable at the touch of a knob for "hard" or "soft" keying according to
> your taste. Built-in keyer can be used in Curtis A or B modes, adjustable
> 5-63 WPM.
>
> *17 selectable transmit bandwidths: *from 1000-4000 Hz. DSP-generated to
> give your SSB audio a well rounded sound tailored to your voice
> characteristics. A low frequency roll-off provides further control.
>
> *RX EQ and TX EQ *in 6 db/octave filters selectable in 1-dB steps from
> high pitched at minus 20 dB to essentially flat response at 0 dB to bassy at
> plus 20 dB. **
>
> *DSP Noise Reduction*, *automatic notch and manual notch* reduces
> interference from undesired carriers and random noise. Manual notch range
> 20-4000 Hz center, 10-300 Hz width, >50 dB rejection.
>
> *Band Sweep *gives you a snapshot of the entire band in seconds. Find the
> pileups or scout for a clear spot automatically without touching the tuning
> knob. * *
>
> *Broad range Auto Tuner: *identical tuner as used in the ORION II, matches
> most antennas up to 10:1 SWR (HF only). 100 Tune Memories. Order your
> OMNI-VII with or without this option.
>
> *Three antenna connectors: *Two SO-239 transceiver outputs, plus a third
> SO-239 connector for auxiliary receive-only antenna. Antenna switching is
> front panel selectable.
>
> *Updates by Flash-ROM: *Serial port interface for local rig control via PC
> and for Flash-ROM updates available via the Internet. Commands are a
> superset of those used for the Jupiter. To obtain the very latest version
> of the OMNI-VII, visit our firmware download website at www.rfsquared.comand download the software. Connect
> the radio to a serial port on your PC and you are up to date in a flash. E
> asy!
>
> *Quad bandstacking registers and 100 memories** *
>
> *Optional Model 302R remote encoder/keypad *works with the OMNI-VII. Plug
> it in and control selected features sitting back in your easy chair.
>
> *Aluminum chassis construction *and steel outer case makes the rig an easy
> traveler at only 5 inches H x 12 inches W x 14.75 inches D. Weighs just 14
> pounds!
>
> *8 pin mic connector* as used on ORION II
>
> Retail Price: Without internal automatic antenna tuner, $ 2650. With
> internal automatic antenna tuner, $ 2950. Optional Collins mechanical
> filters at 500 Hz and 300 Hz, $ 99 each.
>
> To download the 4 page color brochure in .pdf Adobe Acrobat format, click
> here <http://rfsquared.com/file_download/161>.
> The Omni VII Schematics are now avaible on the Omni VII RFSquared page, click
> here <http://rfsquared.com/file_download/154> to download the schematics,
> or click here <http://rfsquared.com/Updates/588/588> to goto the Omni VII
> RFSquared page for other downloads relating to the Omni VII.
>
> The second release of the operator's manual, dated 8/2007, is now
> available for download. This is a 39 page document in Adobe Acrobat .pdf
> format. Click here to download <http://rfsquared.com/file_download/166>.
> This is the operation manual for the radio only. The One Plug GUI software
> and its operation manual is available from our firmware update site at
> www.rfsquared.com. Click here to go to the rfsquared.com Omni-VII site
> <http://www.rfsquared.com/Updates/588/588>.
>
> Click here <http://rfsquared.com/file_download/167> to read the manual
> revision history.
>
> A 23-minute video on the Omni-VII is now available. Visit the video page
> by clicking here <http://radio.tentec.com/video#ovii> to view the video in
> your browser or to download at no charge. The video is also available for
> sale for $ 10 postage paid in the USA in DVD format, refundable with
> purchase of a new Omni-VII.
> Independent testing data from Rob Sherwood at Sherwood Engineering is now
> available by clicking here <http://rfsquared.com/file_download/162>.
> Sherwood rates the receiver performance better than the claimed factory
> specifications and above almost every HF transceiver offered for sale to
> date.
>
> The first formal review of the OMNI-VII has appeared from ARRL in the July
> 2007 issue of QST. This is a superb review of this fantastic new radio and
> places the receiver performance far above comparably priced transceivers
> like the Yaesu FT-2000 and the Icom IC756ProIII. Click here<http://www.arrl.org/members-only/prodrev/pdf/pr0707.pdf>if you are an ARRL member to read the review.
>
> _______________________________________________
> CLUSTER mailing list
> CLUSTER  radio-amador.net
> http://radio-amador.net/cgi-bin/mailman/listinfo/cluster
>
>
>
> --
> Best 73 from:
> regards from:
> CT4RK
> Carlos Mourato
> Sines
>
> Antes de imprimir este e-mail, pense que estará a gastar papel e tinta.
> Proteja o ambiente
>
> -----------------------------------------------------------
> Este e-mail destina-se a fornecer informações de utilidade para os
> destinatarios referidos, e não poderá ser considerado SPAM.
> Se não desejar receber mais informações deste emissor, responda a este
> mail com -REMOVER- no campo "ASSUNTO", ou bloqueando o emissor deste mail,
> nas suas configurações de privacidade.
> Esta mensagem está de acordo com a legislação Europeia sobre o envio
> de mensagens (Directiva 2000/31/CE do Parlamento Europeu; Relatório
> A5-0270/2001 do Parlamento Europeu).
>
> _______________________________________________
> CLUSTER mailing list
> CLUSTER  radio-amador.net
> http://radio-amador.net/cgi-bin/mailman/listinfo/cluster
>
>


-- 
Cumprimentos

Salomão Fresco
CT2IRJ

_________________________________________________________
If it works... dont fix it!


Esta mensagem foi escrita com electrões 100% reciclados.
-------------- próxima parte ----------
Um anexo em HTML foi limpo...
URL: http://radio-amador.net/pipermail/cluster/attachments/20071123/c1ba1bf7/attachment.htm


Mais informações acerca da lista CLUSTER